Mitsubishi Fuso Canter 4M42: Features, Specifications, and Troubleshooting
Mitsubishi Canter 4M42 Service Manual: A Complete Guide
If you own or operate a Mitsubishi Canter 4M42 truck, you know how important it is to keep it in good condition. The Mitsubishi Canter 4M42 is a reliable and versatile light-duty truck that can handle various tasks and terrains. However, like any vehicle, it requires regular maintenance and occasional repairs to ensure its optimal performance and safety.
mitsubishi canter 4m42 service manual
That's why you need a service manual for your Mitsubishi Canter 4M42. A service manual is a comprehensive document that provides detailed information and instructions on how to use, maintain, and repair your vehicle. It covers everything from the engine to the electrical system, and helps you troubleshoot any problems that may arise.
In this article, we will give you a complete guide on how to use the Mitsubishi Canter 4M42 service manual. We will also explain the features and specifications of the Mitsubishi Canter 4M42 truck, and share some tips and tricks for maintaining it. By the end of this article, you will have a better understanding of your vehicle and how to take care of it.
Features and Specifications of the Mitsubishi Canter 4M42
The Mitsubishi Canter 4M42 is a light-duty truck that belongs to the Mitsubishi Fuso Truck and Bus Corporation's Canter series. The Canter series was first introduced in 1963 and has since been sold in various markets around the world. The Mitsubishi Canter 4M42 is one of the models that was produced between 1993 and 2002.
The Mitsubishi Canter 4M42 has several features and specifications that make it a suitable vehicle for various purposes. Here are some of them:
Engine
The engine of the Mitsubishi Canter 4M42 is a four-cylinder diesel engine with a direct injection system. It has a displacement of 3.9 liters (238 cubic inches) and produces a maximum power of 125 horsepower (93 kilowatts) at 3200 rpm and a maximum torque of 294 newton-meters (217 pound-feet) at 1800 rpm. The engine is equipped with a turbocharger and an intercooler for improved performance and efficiency.
Transmission
The transmission of the Mitsubishi Canter 4M42 is a five-speed manual transmission with a single dry plate clutch. The transmission has five forward gears and one reverse gear, with the following ratios:
Gear Ratio --- --- 1st 5.380 2nd 2.940 3rd 1.680 4th 1.000 5th 0.760 Reverse 5.380 Chassis
The chassis of the Mitsubishi Canter 4M42 is a ladder-type frame with a semi-elliptic leaf spring suspension on both the front and rear axles. The brakes are hydraulic with vacuum servo assistance, and consist of disc brakes on the front wheels and drum brakes on the rear wheels. The steering is power-assisted recirculating ball type, with a steering angle of 45 degrees.
Body
The body of the Mitsubishi Canter 4M42 is a cab-over-engine (COE) design, with a tilt cab that allows easy access to the engine compartment. The body dimensions vary depending on the wheelbase and the type of cargo bed, but the typical length is around 5.5 meters (18 feet), the width is around 2 meters (6.6 feet), and the height is around 2.4 meters (7.9 feet). The gross vehicle weight (GVW) ranges from 4.5 to 6.5 tons (9,900 to 14,300 pounds), and the payload capacity ranges from 2 to 4 tons (4,400 to 8,800 pounds).
How to Use the Mitsubishi Canter 4M42 Service Manual
The Mitsubishi Canter 4M42 service manual is a valuable resource for anyone who owns or operates this vehicle. It contains detailed information and instructions on how to use, maintain, and repair your truck. It also helps you diagnose any problems that may occur and provides solutions for them.
The service manual is organized into several sections, each covering a different aspect of the vehicle. Here are the main sections and what they contain:
Overview
This section gives you an overview of the service manual and its contents. It explains how the service manual is structured and how to use it effectively. It also provides some general information about the vehicle, such as its identification numbers, specifications, features, and options.
General Information
This section provides some general information that is applicable to all parts of the vehicle. It includes precautions for servicing the vehicle, such as safety rules, warnings, cautions, and notes. It also includes information on how to identify the vehicle components, how to read the wiring diagrams, how to use the special tools and equipment, and how to follow the maintenance schedule.
Engine
This section covers everything related to the engine of the vehicle. It includes information on how to inspect, adjust, repair, and replace the engine components, such as the cylinder head, pistons, valves, camshaft, crankshaft, oil pump, fuel pump, injectors, turbocharger, intercooler, etc. It also includes information on how to perform engine tests and measurements, such as compression test, oil pressure test, fuel pressure test, etc.
Transmission
This section covers everything related to the transmission of the vehicle. It includes information on how to inspect, adjust, repair, and replace the transmission components, such as the clutch, gears, shafts, bearings, synchronizers, etc. It also includes information on how to perform transmission tests and measurements, such as clutch pedal free play adjustment, gear shift lever adjustment, etc.
Chassis
This section covers everything related to the chassis of the vehicle. It includes information on how to inspect, adjust, repair, and replace the chassis components, such as the frame, suspension, brakes, steering, wheels, tires, etc. It also includes information on how to perform chassis tests and measurements, such as brake fluid level check, brake pedal height adjustment, wheel alignment check, etc.
Body
This section covers everything related to the body of the vehicle. It includes information on how to inspect, adjust, repair, and replace the body components, such as the cab, doors, windows, seats, mirrors, lights, wipers, etc. It also includes information on how to perform body tests and measurements, such as door lock operation check, window regulator operation check, etc.
Electrical System
This section covers everything related to the electrical system of the vehicle. It includes information on how to inspect, test, and troubleshoot the electrical components, such as the battery, alternator, Electrical System
This section covers everything related to the electrical system of the vehicle. It includes information on how to inspect, test, and troubleshoot the electrical components, such as the battery, alternator, starter, ignition system, fuel system, cooling system, lighting system, instrument panel, etc. It also includes information on how to read and understand the wiring diagrams and circuit diagrams.
Tips and Tricks for Maintaining the Mitsubishi Canter 4M42
The Mitsubishi Canter 4M42 service manual provides you with all the information and instructions you need to maintain and repair your vehicle. However, there are also some tips and tricks that you can follow to make your vehicle run more smoothly and efficiently. Here are some of them:
How to save fuel and reduce emissions
Fuel consumption and emissions are affected by various factors, such as driving habits, road conditions, weather conditions, vehicle load, etc. To save fuel and reduce emissions, you can do the following:
Drive at a moderate speed and avoid sudden acceleration and deceleration.
Shift gears at the appropriate time and avoid over-revving the engine.
Keep the tires inflated to the recommended pressure and check them regularly.
Use the air conditioner sparingly and turn it off when not needed.
Keep the engine tuned and serviced according to the maintenance schedule.
Replace the air filter, fuel filter, oil filter, and spark plugs as required.
Use the recommended grade and quality of fuel and oil.
How to extend the service life of the vehicle
The service life of the vehicle depends on how well you take care of it. To extend the service life of your vehicle, you can do the following:
Follow the maintenance schedule and perform regular inspections and adjustments.
Repair any problems or faults as soon as possible and use genuine parts and accessories.
Clean the vehicle regularly and protect it from rust and corrosion.
Avoid overloading or towing beyond the vehicle's capacity.
Avoid driving on rough or unpaved roads or in harsh weather conditions.
Park the vehicle in a shaded and ventilated area and avoid direct sunlight or extreme temperatures.
How to prevent common problems and faults
Some problems and faults may occur due to normal wear and tear or external factors. To prevent common problems and faults, you can do the following:
Check the fluid levels and top up or change them as required.
Check the belts and hoses for cracks or leaks and replace them as required.
Check the brakes for wear or damage and adjust or replace them as required.
Check the lights for proper operation and replace any burnt-out bulbs or fuses.
Check the wipers for wear or damage and replace them as required.
Check the battery for corrosion or damage and clean or replace it as required.
Conclusion and FAQs
The Mitsubishi Canter 4M42 is a reliable and versatile light-duty truck that can handle various tasks and terrains. However, like any vehicle, it requires regular maintenance and occasional repairs to ensure its optimal performance and safety. That's why you need a service manual for your Mitsubishi Canter 4M42.
The service manual is a comprehensive document that provides detailed information and instructions on how to use, maintain, and repair your vehicle. It covers everything from the engine to the electrical system, and helps you troubleshoot any problems that may arise. By following the service manual, you can save time, money, and hassle while keeping your vehicle in good condition.
In this article, we have given you a complete guide on how to use the Mitsubishi Canter 4M42 service manual. We have also explained the features and specifications of the Mitsubishi Canter 4M42 truck, and shared some tips and tricks for maintaining it. By reading this article, you have gained a better understanding of your vehicle and how to take care of it.
We hope you have found this article helpful and informative. If you have any questions or comments, please feel free to contact us. We would love to hear from you.
Here are some FAQs that you may find useful:
FAQs
Where can I get a Mitsubishi Canter 4M42 service manual?
You can get a Mitsubishi Canter 4M42 service manual from the official Mitsubishi website, or from authorized dealers or service centers. You can also download a PDF version of the service manual online from various sources, but make sure they are reliable and updated.
How often should I service my Mitsubishi Canter 4M42?
You should service your Mitsubishi Canter 4M42 according to the maintenance schedule provided in the service manual. The maintenance schedule varies depending on the type and frequency of use of your vehicle, but generally, you should service your vehicle every 10,000 kilometers (6,200 miles) or every six months, whichever comes first.
What are the common problems or faults of the Mitsubishi Canter 4M42?
Some of the common problems or faults of the Mitsubishi Canter 4M42 are:
Engine overheating or losing power
Transmission slipping or grinding
Brakes squeaking or fading
Lights dimming or flickering
Wipers skipping or smearing
Battery draining or dying
If you encounter any of these problems or faults, you should refer to the service manual and follow the troubleshooting procedures. If the problem persists or is beyond your ability to fix, you should consult a professional mechanic.
How can I improve the performance and efficiency of my Mitsubishi Canter 4M42?
You can improve the performance and efficiency of your Mitsubishi Canter 4M42 by following these tips:
Drive at a moderate speed and avoid sudden acceleration and deceleration.
Shift gears at the appropriate time and avoid over-revving the engine.
Keep the tires inflated to the recommended pressure and check them regularly.
Use the air conditioner sparingly and turn it off when not needed.
Keep the engine tuned and serviced according to the maintenance schedule.
Replace the air filter, fuel filter, oil filter, and spark plugs as required.
Use the recommended grade and quality of fuel and oil.
How can I contact Mitsubishi for support or feedback?
You can contact Mitsubishi for support or feedback by visiting their official website, calling their customer service hotline, sending them an email, or visiting their social media pages. You can also contact your local dealer or service center for more specific inquiries or assistance.
71b2f0854b